Our MIG 160DV (Dual Voltage) operates on either 110 or 220 volt power. A simple idea, but think about it: crowded body and muffler shops can use it anywhere. Do-it-yourselfers can run it in the basement, garage or workshop! Racers especially appreciate the ability to work on 220 volts in the shop, then go out to the track for on-site repairs on 110 volts. Farmers can use a generator for in the field repairs on 110 volts, then take this workhorse back to the shop and run it on 220 volt power.
160 amps will weld anywhere from light gauge sheet metal to 5/16" steel. Eight heat settings provide a range of flexibility to accomplish any welding task you've got. A 10' welding gun is standard and can be upgraded to a 12' or 15'. We can also install the welding gun of your choice as well. To save time, you can reverse the polarity without any tools for quick changeover to flux cored wires. When you are looking for a MIG welder with the power and durability for commercial shop use, and the adaptability to perform on-site repairs, look into the MIG 160DV. You'll be surprised how much MIG your money can buy.
When you purchase an HTP MIG welder it comes complete with the following items: power unit, gun, ground clamp, flow meter, How to MIG Weld DVD (Available in VHS also), tip and nozzle. Our welders come complete with everything needed to get started welding except the gas bottle. We would love to sell you the gas bottle however we always recommend you check with you local gas supplier first to make sure they will fill you own gas bottle. Scroll below to view our Gas Bottles, theirspecs and other accessories for your MIG welder.
The MIG 160DV is shipped directly from our warehouse, with your other items, by truck. Freight/shipping charges on the website can vary greatly, we can usually get you a better, more accurate rate if you contact one of our customer service representatives at 800-872-9353 or email us at sales@htpweld.com for a shipping estimate. We work with many carriers and will get you the best rate available to your area. To ensure the lowest rate, it is best to have your welder shipped to a commercial address or we can find a truck terminal in your area that you can pick your welder up at. If you would like to place your order now please do so by adding to your shopping cart. One of our customer service representatives will contact you by phone or email with an exact shipping cost.
Tank not included.
Price: $ 1,199.00
Gear Drive Feed System
Shipping Information - Click Here
The item you are inquiring about will be shipped directly from our warehouse, with your other items, by truck. Please call one of our customer service representatives at 800-872-9353 or email us atsales@htpweld.com for a shipping estimate. We work with many carriers and will get you the best rate available to your area. To ensure the lowest rate, it is best to have your welder shipped to a commercial address or we can find a truck terminal in your area that you can pick your welder up at. If you would like to place your order now please do so by adding to your shopping cart. One of our customer service representatives will call or email you back with shipping charges.
HTP MIGs at a Glance
Mig 140
Mig 160
Mig 160DV
Mig 200
Mig 2400
110V
220V
Maximum Output Amperage
140
160
140
160
200
240
Minimum Output Amperage
25
20
20
20
20
20
Maximum Recommended Thickness
3/16" to 1/4"
1/4" tp 5/16"
3/16" to 1/4"
1/4" to 5/16"
5/16" to 3/8"
3/8" to1/2"
Heat Settings
6
8
6
8
24
24
Duty Cycle
20% @ 140 amps 100% @ 62 amps
20% @ 160 amps 100%@78 amps
35% @140 amps 100% @ 78 amps
20% @ 160 amps 100% @ 78 amps
20% @ 200 amps 100% @ 105 amps
35% @ 240 amps 100% @ 142 amps
Open Circuit Voltage
20 to 35
19 to 35
17 to 28
17 to 36
20 to 37
18 to 38.5
Circuit Breaker Protection
Yes
Yes
Yes
Yes
Yes
Yes
Cooling
Forced Air
Forced Air
Forced Air
Forced Air
Forced Air
Dual Fan Forced Air
Wire Size
.023" to .035"
.023" to .035"
.023" to .035"
.023" to .035"
.023" to .035"
.023" to .045"
Input Voltage
110V
220V
110V
220V
220V
220V
Input Amperage
30
25
30
25
30
40
Wire Feed Rate (in./min.)
7 to 475
7 to 625
7 to 625
7 to 625
7 to 625
7 to 625
Size (w/wheels) Length Width Height
33" 13" 20 1/2"
33" 13" 27"
33" 13" 27"
33" 13" 27"
33" 13" 27"
33" 13" 27"
Shipping Weight
135 lbs.
165 lbs.
195 lbs.
195 lbs.
235 lbs.
All HTP MIG Welders Offer
Capability to braze steel, weld aluminum, steel, stainless steel and cast iron – without expensive add-on options.
The ability to handle 10 lbs., 30 lbs. or 40 lbs. spools of wire.
Free welding DVD actually gives you a "through the helmet" look at proper welding techniques and lets you hear what to listen for – instruction that will benefit both beginners and pros. Also describes the operation, maintenance and troubleshooting tips for your welder. Our special toll-free service and assistance hotline: 1-800-USA-WELD. Expert advice, parts and accessories are only a phone call away!
3 Year Guarantee – HTP welders have a 3 year guarantee, so you know they will keep working for you years down the road.
Tweco® or Binzel® Style welding gun available in 10', 12' or 15' lengths.
TWECO® is a registered trademark of Tweco Products, Inc. BINZEL® is a registered trademark of Abicor Binzel. HTP America, Inc. is not affiliated with the aforementioned companies.
