HTP takes plasma cutting technology one step further with the MicroCut 625. With our inverter technology, the MicroCut 625 weighs in at only 39 pounds, but it packs a whopping 40 amps of high tech cutting power in its compact cabinet - allowing you to severance cut 5/8" steel!
Infinite amperage adjustment means you will have no problem keeping the raw cutting power of the MicroCut 625 under control. Dial it down to 10 amps for intricate cutting on light gauge sheet metal. Crank it up to 40 amps for serious frame work, bracket building, or whatever fabricating job you may have in mind. Whether it's steel, aluminum, stainless steel or any other metal that conducts electricity, the MicroCut 625 will slice through it like a hot knife through butter.
Inverter technology packs all this power into a cabinet which measures only 14½" high, 23½" long, and 9¼" wide, so it won't take up a lot of room in your shop. Weighing only 39 lbs. means you can take this cutter right to the job. If you need to get on top of a combine or a semi-trailer, you can do it with the MicroCut 625.
The plasma torch and ground cable feature a quick disconnect design, making it possible to remove them without any tools, for quick storage and portability. Just turn the large nut clockwise to attach the torch or ground clamp, or counter clockwise to remove. This simplified storage and/or service. Additionally, due to the superior design of the plasma torch, consumable parts last longer than standard plasma torches. Also, this cutter features instant arc starting without high frequency, so you will be able to start your arc right through rusty or painted surfaces, while reducing the possibility of damaging an on-board computer.
Inverter technology is efficient. It only draws 30 amps on 220 volt power, so you can plug it into almost any 220 volt outlet. Naturally, the MicroCut 625 has HTP's 90-day money back guarantee and a two-year warranty.
When you compare the MicroCut 625 to the other cutters on the market, you'll see there is no comparison.
