MicroCut 625 Plasma Cutter, MicroCut 625 Plasma Accessories

HTP takes plasma cutting technology one step further with
the new MicroCut 625. With our new inverter technology, the
MicroCut 625 weighs in at only 39 pounds, but it packs a
whopping 40 amps of high tech cutting power in its compact
cabinet – allowing you to severance cut 5/8˝ steel!

Infinite amperage adjustment means you will have no problem
keeping the raw cutting power of the MicroCut 625 under
control. Dial it down to 10 amps for intricate cutting on light
gauge sheet metal. Crank it up to 40 amps for serious frame
work, bracket building, or whatever fabricating job you may
have in mind. Whether it’s steel, aluminum, stainless steel or
any other metal that conducts electricity, the MicroCut 625
will slice through it like a hot knife through butter.

Inverter technology packs all this power into a cabinet which
measures only 14 ½" high, 23 ½" long, and 9 ¼" wide, so
it won’t take up a lot of room in your shop. Weighing only
39 lbs. means you can take this cutter right to the job. If you
need to get on top of a combine or a semi-trailer, you can do
it with the MicroCut 625

Price: $ 1429.00

Quick disconnect Plasma Torch

The plasma torch and ground cable feature a quick disconnect
design, making it possible to remove them without any
tools, for quick storage and portability. Just turn the large nut clockwise to attach the torch or ground clamp, or counter clockwise to remove. This simplified storage and/or service. Additionally, due to the superior design of the plasma torch, consumable parts last longer than standard plasma torches. Also, this cutter features instant arc starting without high frequency, so you will be able to start your arc right through rusty or painted surfaces, while reducing the possibility of damaging an on-board computer.

Inverter technology is efficient. It only draws 30 amps on 220
volt power, so you can plug it into almost any 220 volt outlet. Naturally, the MicroCut 625 has HTP’s 90-day money back guarantee and a two-year warranty.

When you compare the MicroCut 625 to the other cutters on
the market, you’ll see there is no comparison.

Back of MicroCut 625

Plasma Cutters at a Glance

	MicroCut 201	MicroCut 301	MicroCut 625	MicroCut 875S
Primary Voltage (volts)	110	220	220	230
Primary Amperage (amps)	20	16	30	40
Cutting Current (amps)	5-15 amps Infinitely Variable	5-25 amps Infinitely Variable	10 to 40 amps Infinitely Variable	30 to 55 amps Infinitely Variable
Open Circuit Voltage (volts DC)	460	430	280	320
Cutting Voltage (volts DC)	100	85	110	102 @ 55 amps 96 @ 45 amps
Quality Cutting Capacity	3/16˝@ 10˝/min	5/16˝@ 12˝/min	1/2˝ @ 14˝/min	3/4˝ @ 7 1/2˝ min
Severance Cutting Capacity 5˝/min	1/4˝@ 6˝/min	3/8˝ @ 6˝/min	5/8˝ @ 3˝ min	1 1/8˝ @ 5" min
Duty Cycle 100%@	35% @ 15 amps	20% @ 25 amps	60% @ 40 amps	40% @ 55 amps 100% @ 45 amps
Weight	14 lbs	14 lbs	39 lbs	40 lbs
Dimensions
Length	13˝	13˝	23 1/2˝	22˝
Width	4 1/2˝	4 1/2˝	9 1/4˝	8˝
Height	7˝	7˝	14 1/2˝	11 1/2˝
Cutting Torch Length	13 ft.	13 ft.	19 ft.	20 ft.
Ground Length	9 ft.	9 ft.	10 ft.	10 ft.
Input Power Cord Length	6 ft.	6 ft.	7 ft.	12 ft.
Plasma/Cooling Gas Pressure	37 psi	80 psi	60 - 75 psi	70 psi
Plasma/Cooling Gas Volume	1 cfm	3.5 cfm	4.25 cfm	3.2 cfm