MicroCut 875S Plasma Cutter

Untitled Document

Free Shipping* on all Plasma Cutters and orders over $35!
Plasma Cutters free shipping is limited to the Continental United States

Plasma Cutters

Product Specifications

View Videos

Download Manual

If you are doing serious fabricating in steel, aluminum or stainless steel then you need power and lots of it. Whether it's an important, large project or a day-in, day-out production process the MicroCut 875S with its 55 amps of raw cutting power is up to the task!

Our customers have found plenty of uses for the MicroCut 875S. Some common ones are implement repairs and modifications, custom aluminum truck beds, and heavy marine fabrication. These users tell us they prefer the MicroCut 875 because it has the power – and the duty cycle (100% @ 45 amps) – for heavy cutting all day long. If you need to turn a dumpster into metal corn flakes, then this is the tool for you.

The MicroCut 875S is based on the MicroCut 625's inverter technology, proven in the field since 1998. But we put the machine on a diet – increasing the power by 37% but keeping the weight the same, making it easy to take this cutter right to the job. And a 20 ft cutting torch will allow you to get up on top of equipment if that's where the cutting needs to take place.

A machine like the MicroCut 875S lets you redefine production and fabrication techniques. The possibilities are truly staggering!

Just feed it 220 volt power and clean compressed air and it will easily blast through 3/4" solid steel plate at 7 1/2"/min and severance cut 1 1/8" steel. The arc is ignited without high frequency, extending consumable life while at the same time eliminating any interference with computers, TV's or telephones. And it features automatic arc re-ignition for cutting expanded metal.

For all its power, the MicroCut 875S is easy to master. Its infinitely adjustable power is easily tamed for even delicate tasks on mild, stainless or high carbon steel, aluminum, brass, copper, galvanized, or rusty or painted plate.

Do you need a MicroCut 875S? If your work involves metal, and you can visualize the need for this tool, the answer is probably "yes". The MicroCut 875S . . . it could change the way you think about metal.

The MicroCut 875S has Free Shipping anywhere in the Continental United States, additional charges will apply for Hawaii, Alaska, Puerto Rico and international locations. We are happy to ship the MicroCut 875S to any location outside our Free Shipping zone, however there will be an additional charges. Please call or email us at 800-872-9353 or sales@htpweld.com to discuss any shipping questions. To place your order now, please do so by adding to your shopping cart. One of our customer service representatives will contact you by phone or email if there are any additional shipping costs.

	MicroCut 301	MicroCut 600	MicroCut 875S
Primary Voltage (volts)	220	220	230
Primary Amperage (amps)	16	30	40
Cutting Current (amps)	5-25 amps Infinitely Variable	10 to 40 amps Infinitely Variable	30 to 55 amps Infinitely Variable
Open Circuit Voltage (volts DC)	430	350	320
Cutting Voltage (volts DC)	85	110	102 @ 55 amps 96 @ 45 amps
Quality Cutting Capacity	5/16˝@ 12˝/min	3/8˝ @ 10˝/min	3/4˝ @ 7 1/2˝ min
Severance Cutting Capacity 5˝/min	3/8˝ @ 6˝/min	1/2˝ @ 5˝ min	1 1/8˝ @ 5" min
Duty Cycle 100%@	20% @ 25 amps	20% @ 40 amps	40% @ 55 amps 100% @ 45 amps
Weight	14 lbs	22 lbs	40 lbs
Dimensions
Length	13˝	15˝	22˝
Width	4 ½˝	6˝	8˝
Height	7˝	12 ½˝	11 ½˝
Cutting Torch Length	13 ft.	13 ft.	20 ft.
Ground Length	9 ft.	12 ft.	10 ft.
Input Power Cord Length	6 ft.	7 ft.	12 ft.
Plasma/Cooling Gas Pressure	80 psi	60 - 75 psi	70 psi
Plasma/Cooling Gas Volume	3.5 cfm	3.5 cfm	3.2 cfm