If you are doing serious fabricating in steel, aluminum or stainless steel then you need power and lots of it. Whether it's an important, large project or a day-in, day-out production process the MicroCut 875S with its 55 amps of raw cutting power is up to the task!
Our customers have found plenty of uses for the MicroCut
875S. Some common ones are implement repairs and modifications, custom aluminum truck beds, and heavy marine fabrication. These users tell us they prefer the MicroCut 875 because it has the power – and the duty cycle (100% @ 45 amps) – for heavy cutting all day long. If you need to turn a dumpster into metal corn flakes, then this is the tool for you.
The MicroCut 875S is based on the MicroCut 625's inverter
technology, proven in the field since 1998. But we put the machine on a diet – increasing the power by 37% but keeping the weight the same, making it easy to take this cutter right to the job. And a 20 ft cutting torch will allow you to get up on top
of equipment if that's where the cutting needs to take place.
A machine like the MicroCut 875S lets you redefine production
and fabrication techniques. The possibilities are truly staggering!
Just feed it 220 volt power and clean compressed air and it
will easily blast through 3/4" solid steel plate at 7 1/2"/min and severance cut 1 1/8" steel. The arc is ignited without
high frequency, extending consumable life while at the same
time eliminating any interference with computers, TV's or
telephones. And it features automatic arc re-ignition for cutting
expanded metal.
For all its power, the MicroCut 875S is easy to master. Its
infinitely adjustable power is easily tamed for even delicate
tasks on mild, stainless or high carbon steel, aluminum, brass,
copper, galvanized, or rusty or painted plate.
Do you need a MicroCut 875S? If your work involves metal,
and you can visualize the need for this tool, the answer is
probably "yes". The MicroCut 875S . . . it could change the
way you think about metal.
