Miller Spool Guns and Parts| USAWeld.com

Join our email list

(Your shopping cart is empty)

You are here: Home > MIG Spool Guns > Miller Spool Guns and Parts

Sort By:

Page of 1

RSG250 Spool Gun Replacement Parts Photo

Replacement parts for RSG250 and RSG500 Spool Guns

Replacement parts for the RSG250 or RSG500 Spool Guns. These parts will work with any RSG spool gun. This includes the RSG250, RSG250-HTP, RSG250-2400, RSG250-MIL10, RSG250-MIL14, RSG250-C, RSG500, RSG500-2400, RSG500-C, RSG500-HTP, RSG500-MIL14 and the RSG500-MIL10. These parts also fit the Snap-On Spool Guns used on Models MHG5A, MHG5B and MHG5300.

(This picture shows the OEM gun parts for the welder you have selected. It is possible a welding gun other than the OEM gun may be installed on your machine. Please compare the parts in the picture to the parts on your welder. If they are different, please call us at 800-872-9353 or send us a digital picture of the parts you need.)

To place an order, click on the more information button.

RSG200 Spool Gun Replacement Parts Photo

Replacement parts for RSG200

Replacement parts for the RSG200 Spool Guns. These parts will work with any RSG spool gun. This includes the RSG200 and the RSG200-MIL.

To place an order, click on the more information button.

RSG200-MIL Spool Gun - Fits Millermatic 210

Our Price: $699.00
Sale Price: $415.00
You save $284.00!

The RSG200-MIL Spool Gun is an economical alternative for the Millermatic 210. The RSG200-MIL works with the Millermatic 210 with a 4 pin plug. The wire feed adjustment is on the front of the welder. The RSG200 handles .023", .030" and .035" wires, and with 60% @150 amps duty cycle, the RSG 200 will make your aluminum projects easier and eliminate wire feed problems.

RSG250-MIL10 Spool Gun - Fits Miller Welders

Our Price: $1,095.95
Sale Price: $819.00
You save $276.95!

The RSG250-MIL10, 25' Spool Gun is designed to plug into the Millermatic 252, 251 and 250X MIG Welders that have a 10 pin spool gun plug, lug for the power connection, and 5/8-18 male gas connection so it is a direct connect for the above welders. The RSG-250-MIL10 has a duty cycle of 60% @ 250 amps. The wire feed rate is adjustable from 50 to 650 inches/minute. It will handle .023, .030, .035, and .045" diameter wires. It will feed Aluminum, Steel, Stainless Steel and Flux Cored wires. And the RSG-250-MIL10 is made in the USA.

RSG250-MIL14 Spool Gun - Fits Miller Welders

Our Price: $1,329.95
Sale Price: $835.00
You save $494.95!

The RSG250-MIL14, 25' Spool Gun is designed for Miller Welders that have a 14 pin spool gun plug. This spool gun is set up to plug right in to a Miller Trailblazerand XMT welders which have a14 pin plug for the spool gun, a CV setting, and a contactor. The RSG-250-MIL14 has a duty cycle of 60% @ 250 amps. The wire feed rate is adjustable from 50 to 650 inches/minute. It will handle .023, .030, .035, and .045" diameter wires. It will feed Aluminum, Steel, Stainless Steel and Flux Cored wires. And the RSG-250-MIL14 is made in the USA.

RSG500-MIL14, 50' Spool Gun - Fits Miller Welders

Our Price: $1,449.00
Sale Price: $995.00
You save $454.00!

The RSG250-MIL14, 50' Spool Gun is designed for Miller Welders that have a 14 pin spool gun plug. This spool gun is set up to plug right in to a Miller Trailblazerand XMT welders which have a14 pin plug for the spool gun, a CV setting, and a contactor. The RSG-250-MIL14 has a duty cycle of 60% @ 250 amps. The wire feed rate is adjustable from 50 to 650 inches/minute. It will handle .023, .030, .035, and .045" diameter wires. It will feed Aluminum, Steel, Stainless Steel and Flux Cored wires. And the RSG-250-MIL14 is made in the USA.

Shopping Cart Software by Volusion