Have an engine driven arc welder with a CV setting and want to MIG weld aluminum in the field? Then our RSG250-C Spool Gun is your answer. The control box has a contactor and can be installed on any engine drive with a CV setting like the Miller Bobcat.
The RSG250-C Spool Gun is the perfect solution when you need some extra distance between you and the welding machine. This state-of-the-art 25' long gun is ideally suited for applications ranging from farm machinery and semi-trailer repair to construction site jobs or any other application where the power source can't be brought to the work. This advanced gun is also an excellent solution for welding aluminum. The distance from the drive rollers to the contact tip is only 8”, so feeding problems and birds nesting are virtually eliminated.
The RSG250-C's unique contact tip is notched, so burn backs can be easily removed. The tip is also offset for maximum electrical current transfer, resulting in a smoother, more stable arc. A remote wire feed adjustment in the RSG250-C's handle is a real time-saver. It eliminates the time-consuming walk all the way back to the welder to fine-tune your wire feed rate.
|
|
|
Specifications |
|
Amperage |
60% @ 250 amps |
|
Weight (gun only) |
2 3/4 lbs. |
|
Weight (gun & cable) |
14 lbs. |
|
Length |
25 ft. 50 ft. guns available by Special Order |
|
Wire Feed Rate |
50-650 inches/min |
|
Wire Size |
.023", .030", .035", 045” wires |
|
Wire Type |
Steel, Stainless, Flux Cored, & Aluminum |
|
Spool Size |
Standard 4" spools |
.
