|
|
|
|
|
|
HTP Flexible Swan Neck MIG Guns
|
|
|
Our 10', 12' and 15' Flexible Swan Neck Gun fits all HTP MIG Welders. Gun comes complete and ready to use with our Flexible Swan Neck which will allow you to bend the end of your welding gun into virtually any position, allowing you to access very tight confined areas. You can position the Swan Neck so it points right where you want it.
|
|
|
|
|
|
|
|
|
|
RSG Spool Gun - Fits HTP Welders
|
|
|
The RSG250-HTP Spool Gun fits HTP MIG 140, 160, 160DV, 200, 240 and 2400-ST-24 (Newer model purchased Dec 2012 or later) welders. This unit is easily wired into HTP welders and does not require a
control box. The RSG250-HTP Spool Gun is the perfect solution when you
need some extra distance between you and the welding machine. This
state-of-the-art 25' or 50' long gun is
ideally suited for applications ranging from farm machinery and
semi-trailer repair to construction site jobs or any other application
where the power source can't be brought to the work. This advanced gun
is also an excellent solution for welding aluminum. The distance from
the drive rollers to the contact tip is only 8”, so feeding problems and
birds nesting are virtually eliminated.
|
|
|
|
|
|
|
|
|
|
Dual Flowmeter
|
|
|
Dual Flowmeter Regulator with Back-Purge
HTP’s New Dual Flowmeter
is great for MIG and TIG welding
both steel and aluminum. This
flowmeter is perfect for hooking up the same tank to multiple machines, or if
you want to back-purge and don't have a second tank to do so. The 1 ½” pressure
gauge shows how much gas is left in the tank, and goes from 0 to 4000
psi. The output flow is adjustable from 10 to 60 CFH (cubic feet per
hour), and is indicated by a ball which moves up and down in the flow tube.
The fitting is a CGA-580 fitting, so it fits all Argon, Helium, Nitrogen,
and Argon/CO2 mixed gas tanks.
|
|
|
|
|
|
|
|
|
|
50 Amp Plug
|
|
|
50 amp Electrical plug, also know as dryer plug. This plug will work with 208, 220 or 250 volts. The prongs on this plug look like a big 110 volt plug. This plug is usually found in newer buildings NEMA # 6-30P and 6-50P.
If you need the female receptacle, see part number 12543
|
|
|
|
|
|
|
|
|
|
50 Amp Electrical Receptacle
|
|
|
50 amp Electrical receptacle, made by Cooper
If you need the male plug, see part number 12542
|
|
|
|
|
|
|
|
|
|
50 Amp Crowfoot Plug
|
|
|
Crowfoot plug can be
configured for both 50 amps or 30 amps by changing the blades. This plug
will work with 208, 220 or 250 volts.
Cooper Wiring S80 plug.
|
|
|
|
|
|
|
|
|
|
Leather Welding Gloves
|
|
|
Natural leather is the best protection against heat, sparks and spatter. Our Leather Gloves are strong and comfortable, and extra long to protect wrists.The color may vary, and be different than what is shown in the photo.
|
|
|
|
|
|
|
|
|
|
Gas Hose - 6' Long
|
|
|
Gas Hose which is perfect for use on all MIG and TIG Welding Regulators and Flowmeters which
use the standard 5/8" x 18 female fitting commonly found on just about
all Miller, Lincoln and Hobart MIG and TIG welding machines.
|
|
|
|
|
|
|
|
|
|
Gas Hose Adapter
|
|
|
Gas Hose Adapter, 1/8" (4mm) is used to convert the small 1/8" gas hoses on
inexpensive MIG welders to the standard U.S. 5/8"-18 Male Right Hand
thread, which is standard on virtually all MIG Welding Flowmeters and
Regulators sold in the U.S.
|
|
|
|
|
|
|
|
|
|
MIG Welding DVD - Welcome to the World of MIG Welding
|
Our Price: $39.00 Sale Price: $24.45 You save $14.55!
|
|
|
This informative 52 minute MIG Welding DVD, "Welcome to the World of MIG Welding", gives you an indepth, through-the-helmet view and instruction of MIG welding.
|
|
|
|
