|
|
|
|
|
|
Flex Neck TIG Torch Head-Choose the Series Torch that fits your needs
|
|
|
Need to change the angle of your TIG torch to get into that tight area? Trouble is, with a standard TIG torch you can't. Our Flex Neck TIG Torch Head is a unique torch that let's you bend the end of your TIG torch into virtually any position, allowing you quick, easy access to practically any tight, cramped or out-of-the-way spot. Imagine how much easier your welding will be!
|
|
|
|
|
|
|
|
|
|
Swivel Head TIG Torch
|
|
|
Our Swivel Head TIG Torch is designed specifically for those tough tubing fabrication applications where it is virtually impossible to weld with a conventional torch. The head can be quickly swiveled and locked in any position within a 360 degrees rotation. With it, you'll easily be able to reach tight corners, joints, recesses and other previously unreachable spots. Anyone working on experimental aircraft frames, drag racing chassis, or basically any application that requires welding a tube frame will find this special TIG torch not just useful, but an absolute necessity
|
|
|
|
|
|
|
|
|
|
Gas Lens Kit for TIG Torches
|
|
|
If your looking for better shield gas coverage patterns, then our Gas Lens Kit is for you. With better shielding gas patterns the welder can extend the electrode beyond the edge of the gas cup for getting into tight spaces or corners. The kit comes in our compartmentalized plastic box and contains Aluminia Cups and Gas Lens in the following sizes .040", 1/16", 3/32 and 1/8". Availbale for 9, 17, 18, 20 and 26 Series Torches.
|
|
|
|
|
|
|
|
|
|
Water Cooled TIG Torch Packages for Miller Dynasty 200, 300, 350 & Syncrowave 250DX & 350LX Welders
|
|
|
Possible 2 week lead time for this item. 20 Series Water Cooled TIG Torches designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200, Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. Available as a traditional Rigid Neck, Flexible Swan Neck or Swivel Head.
|
|
|
|
|
|
|
|
|
|
20 Series Water-Cooled TIG Torch
|
|
|
Possible 2 week lead time for this item. 20 Series Water-Cooled TIG Torch fits HTP Invertig 201,Invertig 221 and any TIG welder that takes the 20 Series torch. Leather cable cover.
|
|
|
|
|
|
|
|
|
|
TIG Foot Pedal
|
|
|
Our TIG Foot Pedal is a direct plug in for the HTP Invertig 201 and 221. This pedal is available in 12 ½' or 25' lengths. This pedal features a low profile for comfort, the top of the pedal is 5 ½” wide and 8 ½” long. It has a non-slip traction pad on both the base of the pedal and the top, to make sure the pedal does not move on the floor, and your foot does not move on the pedal.
|
|
|
|
|
|
|
|
|
|
Air-Cooled Everlast TIG Torches - 9 Series
|
|
|
9 Series Air-Cooled TIG Torch with small 25 or large 35 (1/2" OD) Dinse, flexible cable and 9mm quick disconnect gas fitting. These HTP/USAWeld TIG torches fit Everlast 185 TIG welder and many import TIG welders with 9mm disconnect.
|
|
|
|
|
|
|
|
|
|
Air-Cooled Everlast TIG Torches - 17 Series
|
|
|
17 Series Air-Cooled TIG Torch with small 25 or large 35 (1/2") Dinse, flexible cable and 9mm quick disconnect gas fitting. These HTP/USAWeld TIG torches fit Everlast 185 TIG welder and many import TIG welders with 9mm disconnect.
|
|
|
|
|
|
|
|
|
|
17 Series TIG Torch for Miller Dynasty 200, Dynasty 300, Syncrowave 250 DX, Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 Series TIG Welders
|
|
|
This
is a 17 Series TIG Torch and will plug right in to the Miller Dynasty
200 and 300 Series Welders, Syncrowave 250 DX,
Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 Series
Welders, and any other Miller TIG Welder which has a 1/2" twist lock
connector and has a 5/8-18 RH gas connection and a solenoid valve built
into the welder. This is a 150
amp 100% duty cycle torch. The cable is made from silicone rubber with a nylon
braided weave overlay which means it is extremely flexible - and it
will stay flexible in cold weather! This design puts much less strain
on your wrist and makes the torch feel lighter. The super
flexible one piece cable assembly is available in 12½' or 25' long.
|
|
|
|
|
|
|
|
|
|
|
17 Series TIG Torch for Thermal Arc 186, Arcmaster 185 and Arcmaster 200 TIG Welders
|
|
|
This
is a 17 Series TIG Torch and will plug right in to the Thermal Arc 186, Arcmaster 185, and Arcmaster 200
Welders, and any other Thermal Arc TIG Welder which has a 1/2" twist lock
connector and has a 5/8-18 RH gas connection and a solenoid valve built
into the welder. This is a 150
amp 100% duty cycle torch. The cable is made from silicone rubber with a nylon
braided weave overlay which means it is extremely flexible - and it
will stay flexible in cold weather! This design puts much less strain
on your wrist and makes the torch feel lighter. The super
flexible one piece cable assembly is available in 12½' or 25' long.
|
|
|
|
