How many times have you been welding and to get into a tight spot you needed a different angle on the welding gun, or a straight swan neck instead of a bent one? I've found myself in that same situation several times and knew there had to be a better way. So I sat down with the design team, described the problem, and they came up with the solution _ the Flexible Swan Neck. This Flexible Swan Neck was designed specifically to fit the TwecoŽ #2 MIG Gun and will allow you to bend the end of your welding gun from 180 up to 80 degrees, allowing you access to very tight confined areas. You know the job; you can barely get your hand and the welding gun in there. Now, with the Flexible Swan Neck you can position the Swan Neck so it points right where you want it. A necessity for getting up over the top of muffler pipes. Racers love it for working on roll cages. This Flexible Swan Neck is 6" long and has four joints in it that give it it's flexibility. It does not come with a gas diffuser, nozzle or contact tip. If you would like to order these parts please refer to the item numbers below:
Gas Diffuser HP52
Nozzle 22-50
.023 Tip HP14-23B
.030 Tip HP14-30B
.035 Tip HP14-35B
.045 Tip HP14-45B
One week lead time needed for this item.
TwecoŽ, TwecoŽ #1, TwecoŽ #2, TwecoŽ #4 and TwecoŽ Mini MIG are registered trademarks of Tweco Products, Inc. USAWeld.com and HTP America, Inc supply high quality replacement parts manufactured by or for HTP to demanding specifications. The parts are designed to be interchangeable and compatible with the aforementioned companies, are not OEM parts and are not endorsed by the aforementioned companies.
