Free Shipping* on all Spot Welders and orders over $35! Spot Welder free
shipping is limited to the Continental United States
HTP Versa Spot 7000 Air Cooled HTP Versa Spot 7000 Water Cooled
HTP has been supplying modern collision repair facilities with state-of-the-art MIG Welders since 1982. If there is one thing we’ve learned over the years, it’s that we can have several tools which all perform basically the same job – with each tool being just a little more specialized and doing its specific job a bit quicker and easier. For example, we have sockets, open end wrenches, box end wrenches and combination wrenches. They all loosen or tighten nuts and bolts, but each has a specific application in which it works better.
Which brings us to the HTP Versa Spot 7000 STRSW welder. A MIG Welder is a tool we all rely on to make quality welds, and that has served the modern body shop well. With the introduction of the Versa Spot 7000, however, the time has come to introduce an exciting new welder to the contemporary collision repair facility.
STRSW or Squeeze Type Resistance Spot Welding has been around for well over 50 years. Now, with the Versa Spot 7000 STRSW, an affordable, practical spot welder is within the reach of practically every one of today’s collision repair facilities.
The Versa Spot 7000 is a fully digital, micro-processorcontrolled resistance welder. All you do is set the thickness of the panels you’re welding. That’s it. The machine then selects the welding current and the number of welding cycles necessary to achieve optimum results! This unique tool allows you to weld quarter panels, roofs, and core supports both quicker and with less finishing time than a MIG Welder.
Item#
Price
Add to Cart
67000
$ 3,845.00
6700-WC
$ 5,845.00
See below for optional spot welding arms
At the center of the Versa Spot 7000 is a heart of copper. Just like our MIG Welders, the Versa Spot 7000 features a solid copper-wound transformer.
This new spot welder’s 7,000 amps of power means it can weld panels up to 12 ga thick (.100"). There’s more, lots more . . . the Versa Spot’s “Pulse Welding” feature produces better results when welding through primer or galvanized panels. Our state-of-the-art, spot welding gun produces 265 lbs of clamping force. The air cooled cables and spot welding gun means you can work fast – make 165 welds/hr on 18 ga panels or 215 welds/hr on 22 ga panels in the continuous mode at 7,000 amps. Optional water cooling increases the duty cycle even further – make 1000 welds/hr on 22 ga panels or 500 welds/hr on 16 ga panels.
The water cooling option offers fully water cooled welding cables and spot welding arms. A water cooler attaches to the cart and recirculates coolant through the spot welding cables and spot welding arms. With eight optional air cooled spot welding arms and three water cooled spot welding arms available, your Versa Spot 7000 can access many areas other welders can’t get to.
The Versa Spot 7000 is just that – Versatile! Perform double-sided spot welds with the pneumatic spot welding gun. Utilizing the Spotter Accessory Kit, perform singlesided spot welding, stud welding, washer welding, and star welding for dent pulling, trim rivet welding, bolt welding, and shrinking.
The Vera Spot 7000s are shipped directly from
our warehouse, with your other items, by truck. For Free Shipping, the
spot welder needs to ship to a commercial address, a
business or we can find a truck terminal in your area that you can pick your
shipment up at. We are happy to ship these items to a residence or outside our Free Shipping zone, however there
will be an additional charge and someone needs to be
available to unload the items from the truck. Please call or email us at 800-872-9353
or sales@htpweld.com
to discuss any shipping questions.To place your order now please do so
by adding to your shopping cart. One of our customer service representatives
will contact you by phone or email if there are any additional shipping costs.
Spots per Hour
Air Cooled
Water Cooled
Thickness
Continuous
Pulse
Continuous
Pulse
20 ga (1.0 + 1.0)
200
65
1000
340
18 ga (1.2 + 1.2)
165
50
900
280
16 ga (1.5 + 1.5)
100
43
550
240
Versa Spot 7000 Control Panel No more knobs and switches! The Versa Spot 7000 has a fully digital control panel. All you do is set the type of tool and the thickness of the panel, and the machine sets the optimum current and number of cycles to optimize the spot weld.
Technical Specifications
Maximum Welding Current
7000 amps
Welding Voltage
8.6 volts
Electrode Pressure @ 110 psi
265 lbs.
Input Voltage
220 volts
Input Amperage
63 amps
Maximum Power
58 kVA
Rated Power
14.2 kVA @ 50%
Maximum Double Sided
1/8" + 1/8"
Spot Welding Thickness
Duty Cycle
3%
Welding Cable Length
67"
Input Power Cord Length
8'
Dimensions
25 1/2" L x 14 1/4" W x 12 1/4" H
Weight (Power Supply)
100 lbs.
1 Spot Welder Activated – lights up when the machine is performing a spot weld
2 Thermal Switch Indicator – lights up when the duty cycle has been exceeded
3 Low Voltage Indicator – lights up when there is an excessive voltage drop
4 Main Power Indicator – indicates main power is on and voltage is correct
5 High Voltage Indicator – indicates excess voltage
6 Tool Selection Switch – depress this switch to select between the following tools: A) Pneumatic Clamp in continuous welding B) Pneumatic Clamp in pulse welding for burning through primer and galvanized panels C) Single Sided Spot Welding and Accessory Kit
7 Accessory Selector Switch – this switch is only activated when the tool selection switch has selected single sided spot welding. Depressing the switch allows you to select between the following accessories: A) Nails, washers and stars for dent pulling and small trim rivets. B) 4mm threaded studs C) 5mm and 6mm threaded studs and large trim rivets D) Single sided spot welding E) Shrinking F) Stitch welding
8 Panel Thickness Selector – select the thickness of the panel and the Versa Spot 7000 does the rest
9 Spot welding time – allows you to “fine tune” the spot welding time.
