Introducing the HTP Arctic Chill 5460 Water Cooler for TIG welding. The Arctic Chill 5460 features a flat folding handle for easy portability – we have seen many coolers without handles, and it is a struggle to get the cooler out from underneath your welder, or in and out from your cart. The convenient screw cap fill, and bottom drain make filling and changing coolant quick and easy. Standard 5/8 - 18 left hand male water fittings means your Arctic Chill cooler is compatible with all major brands of water cooled torches. Clearly marked water in and out lines, makes it harder to reverse the coolant flow, so you don’t boil the coolant in the torch head.
Let’s face it; what is important about a water cooler is what is on the inside. The Arctic Chill 5460 features a ½ HP sealed motor that is made in Italy. A sealed motor will last longer in a harsh environment since dust, dirt, and metal filings won’t get into the windings of the motor. A stainless steel pump, with a bronze impeller, will move plenty of coolant to keep your TIG torch cool. And a 5 bladed fan will move plenty of air across the heat exchanger.
The heat exchanger in the Arctic Chill 5460 measures 7 ½” wide by 11” high, giving you a surface area of over 80 sq inches to dissipate the heat generated by your welding process. Our heat exchanger also features 2 rows of copper tubes, not one like some of our competitors.
The Arctic Chill 5460 is available in 5 models:
220 Volt – for the HTP Invertig 221, includes a direct connect plug
220 Volt – for other brands of TIG welders, does not include plug
Dual Voltage - for the HTP Invertig 221 DV, includes a direct connect plug
Dual Voltage - for other brands of TIG welders, does include plug
Specifications 110 Volts 220 Volts
Motor Input 115 volts 60 Hz 220 volts 50/60 Hz
Maximum Current Draw 1.8 1.1 / 0.9
Rated Cooling Capacity 3760 Watts @ 1.7 /Min or 12,380 Btu/Hr @ 1.8 Qt/Min
Tank Capacity 2 Gallons
Dimensions 14" H x 10" W x 17 ¾/4" D
Weight 30 lbs.