USA Weld Home My Account Shopping Cart
USA Weld Home USA Weld Home Policies Contact Us
Parts Locator
Ordering Information Shipping Information Catalog Request
Product Header
Product Header

Join our email list

HTP America Inc. BBB Business Review
(Your shopping cart is empty)

  Home > Plasma Cutters >

MicroCut 875SC v2
MicroCut 875SC Plasma Cutter Photo

Alternative Views:

The MicroCut 875SC’s unmatched arc stability and power allows you to cut material up to ½” thick at 45 amps, all day long, with 100% duty cycle. Set up with a standard 14-pin connector, the MicroCut 875SC features an Arc OK signal and torch voltage signal (50:1 signal) to run a torch height controller. With the MicroCut 875SC, the maximum rated CNC pierce capacity is ½”; the cut speed at ½” material thickness runs at 24 IPM, and the cut speed at ¼” material thickness runs at 72 IPM. To use your MicroCut 875SC CNC on your plasma table, simply install our optional CNC machine torch* , plug in your table, and switch the cutter into CNC mode.

To get the best cutting capacity, fastest cutting speeds, and longest consumable life out of your CNC plasma cutting applications, we highly recommend using our HTP Max Dry desiccant air dryer system (#25310-2). Dry air is a necessity when running a CNC with a torch height controller.

With 55 amps of cutting power in manual mode, the MicroCut 875SC quality cuts material up to ¾” thick at 8 IPM and severance cuts material up to 1” thick at 4 IPM. If you need to cut thinner gauge sheet metal, no problem—just tweak the amperage down and slice away. Perfect for the serious fabricator, the MicroCut 875SC allows non-stop, efficient cutting (with a duty cycle of 100% at 45 amps) and effectively slices through mild steel, hardened steel, stainless steel, high carbon steel, galvanized steel, aluminum, brass, copper, and even rusty or painted plate. For hand cutting, install our optional hand torch* and switch the cutter into manual mode.

If you need extra consumables for your hand torch or machine torch, please use the following link: MicroCut 875SC v2 Hand & Machine Torch Consumables.

The MicroCut 875SC packs powerful performance into a perfectly sized package, making this versatile cutter perfect both in the shop and on the jobsite. Thick or thin, the MicroCut 875SC gets the job done! Backed by a 2-year warranty and a 90-day money back guarantee, you can’t go wrong with the MicroCut 875SC.

*Plasma cutters and torches sold separately. Please review the list below to select the plasma cutter model that best fits your needs, along with the correct torch for the plasma cutter model you select.

The HTP MicroCut 875SC v2 SHIPS FREE anywhere in the Contiguous United States (i.e., the lower 48). If your ship to address is in Alaska, Guam, Hawaii, Puerto Rico, or any other U.S. State or Territory outside of the Contiguous United States, partial shipping charges will apply. You may still place your order online, but you will be contacted by Customer Service to arrange and pay for partial shipping.

Item# Item Name Our Price Sale Price Qty Add
MC875SC2 A) MicroCut 875SC v2 - Torch Not Included
$ 1,395.00
87002HT B) 20' Hand Torch
$ 349.95
MC875SC2CNC C) MicroCut 875SC v2 w/CNC Kit - Torch Not Included
$ 1,495.00
87200MT E) 20' Machine Torch
$ 595.00
Check the items you wish to purchase, then click

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
5 of 5 microcut875sc v2 March 29, 2020
Reviewer: Wayne Munson from Greensburg , IN United States  
This plasma cutter is a rock solid performer. No cheap Chinese internals and the IP23 rating says it all when it comes to the electronics. That's how you know a inverter is  going to last and put up with a bit harsher environment. The PC boards are well protected. I don hours of cutting with clean, dry air from the max dry desiccant 4 stage dryer and I am still on the same consumables that came with the torch. I'd say the consumables are just as good as hypertherm consumables but the machine itself beats hypertherm's powermax 45 xp in build quality and performance. The arc is very consistent and precise and can cut for a long time so the duty cycle is even better than the hypertherm. Quit wasting your money on the hypertherm. the chances are you will probably have to repair your 30xp or 45xp within 3 to 4 years of intermittent use. When their boards get hot, they get sticky and that metal dust is not blowing off their PC boards just like the Miller's don't.

Was this review helpful to you?

Browse for more products in the same category as this item:

Plasma Cutters
Plasma Cutters > MicroCut 875SC v2
Built with Volusion