USA Weld Home My Account Shopping Cart
USA Weld Home USA Weld Home Policies Contact Us
Parts Locator
Ordering Information Shipping Information Catalog Request
Product Header
Product Header

Join our email list

HTP America Inc. BBB Business Review
(Your shopping cart is empty)

  Home > MIG Spool Guns >

RSG250-MIL10 Spool Gun - Fits Miller Welders
RSG250-MIL Spool Gun Photo

Alternative Views:

Our Price: $829.00

Product Code: RSG250-MIL10

The RSG250-MIL10 Spool Gun is designed to plug into the Millermatic 252, 251 and 250X MIG Welders that have a 10 pin spool gun plug, lug for the power connection, and 5/8-18 male gas connection so it is a direct connect for the above welders. The RSG-250-MIL10 has a duty cycle of 60% @ 250 amps. The wire feed rate is adjustable from 50 to 650 inches/minute. It will handle .023, .030, .035, and .045" diameter wires. It will feed Aluminum, Steel, Stainless Steel and Flux Cored wires. And the RSG-250-MIL10 is made in the USA.

The wire feed rate is easily adjusted without going back to the welder, since we put the wire feed adjustment right in the bottom of the handle. We use a special notched tip for welding aluminum - the tip transfers the welding current to the wire better since there is a slight bend in the notch, forcing the wire to contact the tip. The notch also makes it much easier to remove a burnback if the wire burns back to the tip.

Connection is simple!

1) Plug the 10 pin plug supplied with your RSG-250-MIL10 into the 10 pin recepticle on the front of your welder.

2) Connect the gas hose to your regulator.

3) Connect the power cable to correct lug on your welder, and you are ready to weld.
This spool gun is the perfect solution when you need some extra distance between you and the welding machine. This state-of-the-art 25' long gun is ideally suited for applications ranging from farm machinery and semi-trailer repair to construction site jobs or any other application where the power source can't be brought to the work. This advanced gun is also an excellent solution for welding aluminum. The distance from the drive rollers to the contact tip is only 8, so feeding problems and birds nesting are virtually eliminated.
A remote wire feed adjustment in the RSG250's handle is a real time-saver. It eliminates the time-consuming walk all the way back to the welder to fine-tune your wire feed rate.



60% @ 250 amps

Weight (gun only)

2 3/4 lbs.

Weight (gun & cable)

14 lbs.


25 ft. Available in 50 ft. length by Speical Order

Wire Feed Rate

50-650 inches/min

Wire Size

.023", .030", .035", 045 wires

Wire Type

Steel, Stainless, Flux Cored, & Aluminum

Spool Size

Standard 4" spools


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

MIG Spool Guns
Spool Guns
MIG Spool Guns > Miller Spool Guns and Parts
Spool Guns > Miller Spool Guns and Parts
Built with Volusion