USA Weld Home My Account Shopping Cart
USA Weld Home USA Weld Home Policies Contact Us
Parts Locator
Ordering Information Shipping Information Catalog Request
Product Header
Product Header

Join our email list

HTP America Inc. BBB Business Review
(Your shopping cart is empty)
You are here: Home > MIG Wire > Eutectic Wire - Made in the U.S.A.
Sort By:
Page of 1
Eutectic® Dual Shield DO266S Wire
.045" Eutectic® Dual Shield DO266S Wire, 33 Lbs
Our Price: $139.00

.045" Eutectic® Dual Shield DO266S Wire, 12" Spool, 33 Lbs. A premium flux-cored, dual-shielded, seamless, tubular, and copper cladded wire.

To weld:

Set the wire speed to 250 IPM
Set the arc voltage to 24-25 Volts
Use 75/25 gas at about a 40-50 cfh flow rate
The contact tip to work distance should be about 3/4" (no more than 1")
If you set everything correctly, the amperage reading in the display should be about 160-170 amps.

The above settings work for in-position welds and also for out-of-position vertical up and overhead welds. The above settings are used during AWS D1.1 state certification tests and, if executed properly in multiple passes, can make sound welds on materials of unlimited thickness.
more info
Built with Volusion